The Spec's

Ok so the Massive Project has started already. The blog was kind of a secondary thing I thought of. Not much work has been physically done, but alot of traces and computer work has. (As of 07/11/12)

The specs for this amp is:
Dual channel (Left and right or if your crazy enough bridged)
1000W, Note I have brought up the voltage (+/- 10 V) so a new measurment will have to be taken.
Total (Calculated) Voltage- +/- 80V, thats a total of 160V!!!
Total (Calculated) current to spk: 12.8 AMPS
1.5 kVa Hammond pre-made transformer (182T60), (http://www.hammondmfg.com/182.htm)
3*22,000uF caps per side. (6 in total- 36DY series from Vishay)
Total of 20 output transistors. NPN-PNP
220/110VAC support. (I will be using 110)
Homemade Heatsink with a Fan.
Auto-On circuit with soft start pwr supply.
12VDC standby.
2 VU meters with configuable options (Voltage, power/signal)*NO LONGER ON IT*
More to come later.

-Andre Smith

3 comments:

  1. mohmad2 June 2014 at 18:01

    I saw your project the 1000Watt amp on YouTube. Could you please email me and attached the complete circuit diagram that works I need to try the same project like u have done. ( mohmadrubaai@gmail.com) Wish you good luck and thank you

    ReplyDelete
  2. Unknown26 October 2014 at 23:24

    can u send me pls the schematic ? pornmanager_100@yahoo.gr i know is stupid mail ... i love ur job in youtube dat 1k watt will destroy all windows in the house if get Tarantula sub lol

    ReplyDelete
  3. Unknown8 June 2017 at 16:19

    i need that circuit please send me that 1k circuit (densdj@gmail.com)

    ReplyDelete

Subscribe to: Posts (Atom)